Change the admin password on the Hub

After initial installation, you should change the admin password on the Hub for the default admin user.

The unique, factory-assigned password for the default admin user account is printed on the bottom label of the device and on the loose label included in the package.

If you erase the device configuration or reset the device to factory defaults, the password for the admin user will revert to the original, factory-assigned default password.

1. Log into the AnywhereUSB Plus WebUI as a user with full Admin access rights.

2. On the menu, click System. Under Configuration, click Device Configuration.

   

   The Configuration window is displayed.

3. For Password, enter the new password. The password must be at least eight characters long and must contain at least one uppercase letter, one lowercase letter, one number, and one special character.

   

4. Click Apply to save the configuration and apply the change.

 

For more detailed information about this process, see Change the default password for the admin user.