Hide a Hub that does not currently display in the AnywhereUSB Manager

Note After you have hidden a Hub, you can choose to re-display it. See Display a hidden Hub.

1. Open the AnywhereUSB Manager.
2. Select Configure > Hidden Hubs. The Hidden Hubs dialog appears.
3. Click Add. The Add Hidden Hub dialog appears.
4.  In the Hub Address field, enter the Hub IP address.
5. If you want to update the TCP port number, click Advanced. The Hub TCP port (most systems should leave at default) field displays.
   1. In the Hub TCP port (most systems should leave at default) field, a TCP port number is entered by default. You can change this entry, but it is not recommended.
   2. Click Standard to hide the Hub TCP port (most systems should leave at default) field.
6. Click OK. The Hub appears in the Hub list in the Hidden Hubs dialog.
7. Click Close to close the Hidden Hubs dialog.