Enable auto-connect for a group

You can choose to automatically connect to a selected group each time you open the AnywhereUSB Manager.

Note You can disable auto-connect at any time.

1. Open AnywhereUSB Manager.
2. Expand AnywhereUSB Hubs to display the Hubs.
3. Expand a Hub to display the groups in the Hub.
4. Right-click on the group to which you want to automatically connect.
5. Select Enable Auto Connect. If you were not already connected to the group, you are immediately connected to the group. A note appears next to the group name and in the Group Status pane to show that you are connected to the group.