Additional power and cabling requirements: AnywhereUSB Plus 8 and 24

Note This information applies only to the AnywhereUSB Plus 8 and 24 variants.

Use an appropriate power cable meeting national standards to connect to a standard outlet. The appropriate requirements are listed per region:

• EU/International: VDE Mark, conforming to IEC 60083, IEC 60227, or IEC 60320, with C13 to the appropriate national mains connector, rated for the national mains voltage for your EU/International country.

3 x 0.823 mm2

• USA/Canada: UR Mark, conforming to UL 62, UL 817, or CSA-C22.2, with C13 to 5-15P, 5-15P, or NEMA locking connector, 18 AWG.

The male cable connector to the device is a 2ESDVM-02P (Dinkle). The product is certified and intended for use only with the Digi provided power supply. Use with 3rd party supplies is not covered by the Digi warranty.