Your TX54 device can be configured to use the following location sources:
-
The internal Global Navigation Satellite System (GNSS) module that provides information about the current location of the device.
-
Dead reckoning, by using an external USB GNSS receiver. External dead reckoning USB GNSS receivers are available to be purchased separately from Digi.
-
User-defined static location.
- Location messages forwarded to the device from other location-enabled devices.
By default, both the internal GNSS module and the external dead-reckoning USB GNSS receiver are enabled.
You can also configure your TX54 device to forward location messages, either from the TX54 device or from external sources, to a remote host. Additionally, the device can be configured to use a geofence, to allow you to determine actions that will be taken based on the physical location of the device.
This
PDF
