Change the default hotspot SSID

Required configuration items


  1. Log into Digi Remote Manager, or log into the local Web UI as a user with full Admin access rights.
  2. Access the device configuration:

    1. Locate your device as described in Use Digi Remote Manager to view and manage your device.
    2. Click the Device ID.
    3. Click Settings.
    4. Click to expand Config.

    1. On the menu, click System. Under Configuration, click Device Configuration.

      The Configuration window is displayed.

  3. Click Network > Wi-Fi > Access points > Digi Hotspot AP (Wi-Fi1).
  4. Change the default SSID, Digi Hotspot, to your preferred value.
  5. Click Digi Hotspot AP (Wi-Fi2).
  6. Change the default SSID, Digi Hotspot, to your preferred value.

  7. Click Apply to save the configuration and apply the change.
  1. Select the device in Remote Manager and click Actions > Open Console, or log into the TX64 local command line as a user with full Admin access rights.

    Depending on your device configuration, you may be presented with an Access selection menu. Type admin to access the Admin CLI.

  2. At the command line, type config to enter configuration mode:

    > config
(config)>

  3. Change the SSID for digi_hotspot_ap1 to your preferred value:
    (config)> network wifi ap digi_hotspot_ap1 ssid value

    where value is a string of 1 to 32 characters. If the value contains spaces, enclose in quote marks (").

  4. Change the SSID for digi_hotspot_ap2 to your preferred value:
    (config)> network wifi ap digi_hotspot_ap1 ssid value

    where value is a string of 1 to 32 characters. If the value contains spaces, enclose in quote marks (").

  5. Save the configuration and apply the change.
    (config)> save
Configuration saved.
>
  6. Type exit to exit the Admin CLI.

    Depending on your device configuration, you may be presented with an Access selection menu. Type quit to disconnect from the device.