Upload a new LXC container

 

  Web

Log into the EX15 WebUI as a user with full Admin access rights.

1. From the main menu, click Status. Under Services, click Containers.
2. Click Upload New Container.
3. From your local file system, select the container file in *.tgz format.

   You can download a simple example container file, test_lxc.tgz, from the Digi website.

4. Create Configuration is selected by default. This will create a configuration on the device for the container when it is installed. If deselected, you will need to create the configuration manually.
5. Click Apply.
6. If Create Configuration was deselected when the container was created, click  to go to the container configuration.

   

   See Configure a container for further information about configuring the container.