Stop a script that is currently running

You can stop a script that is currently running.

 

  Web

    Log into the EX15 WebUI as a user with full Admin access rights.

  1. At the Status page, click Scripts.

    The Scripts page displays:

  2. For scripts that are currently running, click Stop Script to stop the script.

  Command line

  1. Select the device in Remote Manager and click Actions > Open Console, or log into the EX15 local command line as a user with full Admin access rights.

    Depending on your device configuration, you may be presented with an Access selection menu. Type admin to access the Admin CLI.

  2. Determine the name of scripts that are currently running:
    > show scripts
    
     Index  Label        Enabled  Status  Run time
     -----  -----------  -------  ------  --------
     0      script1      true     active
     1      script2      true     idle     01:00
    >

    Scripts that are currently running have the status of active.

  3. Stop the appropriate script:
    )> system script stop script1
    >
  4. Save the configuration and apply the change.
    (config)> save
    Configuration saved.
    >
  5. Type exit to exit the Admin CLI.

    Depending on your device configuration, you may be presented with an Access selection menu. Type quit to disconnect from the device.