Access the terminal screen from the web UI
A user can log into a terminal screen and use CLI commands to access features.
Note You can also access the terminal screen from a port listed in the Serial Status page.
- Log in to the web UI.
- Click System > Terminal. The Terminal screen displays.
- When prompted, enter your user name and password.
- Enter the number of the port that you want to access.
- Information about the port you are connected to displays, as well as commands.
Connecting to port5:
Settings: 9600, 8, 1, none, none
Type '~b.' to disconnect from port
Type '~b?' to list commands - Enter ~b? to display additional commands.
Note The ~bP, ~bO, and ~bN commands are used with the remote power management feature. See Configure Remote Power Management.
| Command | Description |
|---|---|
| ~b. | Disconnect from the port. |
| ~bB | Send a BREAK sequence. |
| ~bc | Clear the history buffer. |
| ~br | Send a DTR reset sequence. |
| ~bP |
Cycle the outlets on this port. Turn the power off, then on. If the power state for the outlet is currently off, then the power is just turned on. |
| ~bO | Power off all the outlets on this port. |
| ~bN | Power on all the outlets on this port. |
| ~b? | Display a list of commands. |
- Enter ~b. to disconnect from the port.
PDF
