View Digi Remote Manager connection status

To view the current Digi Remote Manager configuration:

  WebUI

  1. Log into the 6310-DX WebUI as a user with Admin access.
  2. The dashboard includes a Digi Remote Manager status pane:

  1. Log into the 6310-DX command line as a user with full Admin access rights.

    Depending on your device configuration, you may be presented with an Access selection menu. Type admin to access the Admin CLI.

  2. At the command line, type config to enter configuration mode:
    > config
(config)>
  3. View the central management configuration:
    (config)> show cloud
drm
	cellular_keep_alive 290s
	drm_url my.devicecloud.com
	keep_alive 60s
	keep_alive_misses 3
	retry_interval 30s
enable true
(config)>

  4. Type cancel to exit configuration mode:
    (config)> cancel
>
  5. Type exit to exit the Admin CLI.

    Depending on your device configuration, you may be presented with an Access selection menu. Type quit to disconnect from the device.

 

To view the status of your device's connection to Remote Manager, use the show cloudcommand at the command line: 

> show cloud

 Device Cloud Status
 -------------------

 Status    : Connected
 Server    : my.devicecloud.com
 Device ID : 00000000-00000000-0040FFFF-FF0F4594
>

The Device ID is the unique identifier for the device, as used by the Remote Manager.