Create groups and assign ports to the group

In the AnywhereUSB page in the web UI, you can assign a name to each group, and specify the ports in each group. Each port can only be assigned to one group. Any unassigned ports are included in the Unassigned row that displays beneath the list of groups.

If a group has ports assigned to it, the group will display in the AnywhereUSB Manager, even if a USB device is not connected to a port. You can reassign the unused ports in a group so the group does not appear in the AnywhereUSB Manager. See Hide a group in the AnywhereUSB Manager.

1. Open the web UI for your selected Hub.
2. Click AnywhereUSB from the Configuration section. The AnywhereUSB Configuration page appears.
3. In the Group Description field, enter a name for a group. This name displays in the Group Name field in the Group Status pane in the Anywhere USB Manager.
4. In the row for the group, select the ports for that group. Each port on a Hub can be assigned to only one group. Ports that are not assigned to a group can be put in the default Unassigned group.
5. Repeat the steps 3 and 4 for each group you want to create.
6. When done, click Apply to save the changes.