Add a Hub to the known Hub list

You can manually add Hubs to the known Hub list. The Hubs can be on the same network as your computer, or on a different network.

1. Open the AnywhereUSB Manager.
2. Select Configure > Known Hubs. The Known Hubs dialog appears.
3. Click Add. The Add Known Hub dialog appears.
4.  In the Hub Address field, enter the Hub IP address.
5.  If you want to update the TCP port number, click Advanced. The Hub TCP port (most systems should leave at default) field displays.
   1. In the Hub TCP port (most systems should leave at default) field, a TCP port number is entered by default. You can change this entry, but it is not recommended.
   2. Click Standard to hide the Hub TCP port (most systems should leave at default) field.
6. Click OK. The Hub appears in the Hub list in the Known Hubs dialog.
7. Click Close to close the Known Hubs dialog. The AnywhereUSB Manager attempts to connect to the new Hub.