Enable auto connect for a group

You can choose to automatically connect to a selected group each time you open the AnywhereUSB Manager.

Note You can disable auto connect at any time.

1. Open AnywhereUSB Manager.
2. Expand AnywhereUSB® Plus Hubs to display the Hubs.
3. Expand a Hub to display the groups in the Hub.
4. Right-click on the AnywhereUSB® Plus group to which you want to automatically connect.
5. Select Enable Auto Connect. If you were not already connected to the group, you are immediately connected to the group. A note appears next to the group name and in the Group Status pane to show that you are connected to the group.