Connect the Ethernet hardware

  1. Optional: If you are using an Ethernet connection in addition to the cellular, connect one end of the Ethernet cable to your gateway and the other to a live Ethernet jack.
  2. Connect the XBee antenna to the device.

  3. Connect the power supply.

  4. Startup Sequence - After power is applied:

    a. Power LED The Power LED turns solid blue.
    b. XBee LED The XBee LED turns blinking green when XBee Industrial Gateway creates a ZigBee network.
    c. Network LED The Network LED blinks yellow and green and then turns solid green when XBee Industrial Gateway connects to Remote Manager.