Mechanical specifications

This section provides mechanical dimensions and host PCB footprint guidance for the Digi SMTplus® form factor of the ConnectCore 6UL module.

Dimensions

Note that all dimensions are in millimeters.

Note The NAND flash on the bottom of the ConnectCore 6UL module adds 1mm to the overall PCB thickness and is the tallest component on this side of the printed circuit assembly.

Host PCB footprint and cutout

Note Host PCBs must have a cutout to accommodate the components on the bottom side of the module.

Digi SMTplus® LGA mounting

 

Digi SMTplus® Castellated Edge Via mounting

Weight

The weight of the ConnectCore 6UL module (with Wi-Fi/Bluetooth networking and shield) is 6.60 g.

The weight of the non-wireless ConnectCore 6UL module variant is 6.35 g.

Note See the ConnectCore 6UL product page for mechanical design documents, drawings, and other resources.