Global power consumption

The following tables list the global power consumption of the ConnectCore 6UL module when the system is under the use cases described below. See Variants for specifications on the ConnectCore 6UL module variants listed below.

Suspend and power-off modes

  Suspend to RAM mode Power-off mode  
  Front-end LDO used (VSYS = 4.4V) Front-end LDO not used (VSYS = 3.8V) Front-end LDO used (VSYS = 4.4V) Front-end LDO not used (VSYS = 3.8V) RTC mode

Variant 0x02

17.8 mW

8.55 mW

1.9 mW*

1.32 mW*

 

7.5 uW*

Variant 0x03

17.204 mW

8.094 mW

2.075 mW*

1.426 mW*

Variant 0x04

24 mW

16.72 mW

2.106 mW*

1.52 mW*

Note In power-off mode, the input power supply of the SOM (VSYS-VSYS2) is not disconnected, so VSNVS regulator is still powered. In RTC mode, only the MCA is powered. By cutting the input power supply to the module in power-off mode, you can achieve the same power consumption numbers as in RTC mode. See Power management for detailed information about how to optimize the power consumption in low-power modes.

Run-time modes

  IDLE Display connected (IDLE) Decoding video CPU stress

Variant 0x02

0.442 W

0.460 W

0.658 W

0.667 W

Variant 0x03

0.306 W

0.328 W

0.532 W

0.540 W

Variant 0x04

0.477 W

0.500 W

0.737 W

0.707 W

Note These power consumption numbers should be considered guidelines only, never as fixed or absolute values. Actual values will depend entirely upon individual setup and system application.