Apply a configuration profile

Follow these steps to apply a configuration profile to an XBee device:

1. Switch to the Configuration working mode.
2. Select a radio module.
3. Click the Configuration profilesdrop-down menu on the Configuration toolbar and select Apply configuration profile.

An Open file dialog appears, asking for the configuration profile file to load.

4. Locate the configuration profile (an XPRO file) and click Open. Depending on the firmware compatibility with your radio module and the firmware flash action configured in the profile, a dialog box may appear:

• If the firmware of the configuration profile does not match the firmware running in the radio module but is compatible with the module and the profile is configured to always flash the firmware or flash when it is different, click Yes to update the module's firmware so the profile will load correctly.

• If the firmware of the configuration profile is not compatible with the radio module, click Yes to open the profile in the Profile editor tool.

• If the firmware of the configuration profile matches the firmware running in the radio module but the profile is configured to always flash the firmware, click Yes to update the module's firmware so the profile will load correctly.

• If the firmware of the profile you are loading and the firmware running in the radio module match or the profile is configured to don't flash the radio firmware, XCTU applies the settings saved in the profile to the radio module.