Step 4: Boot your ConnectCore 6 SBC using your microSD card
To boot your ConnectCore 6 SBC using the bootable microSD card:
- Open a serial terminal program and use the following settings:
- Baud rate: 115200
- Data bits: 8
- Parity: None
- Stop bits: 1
- Insert the microSD card into the microSD card holder on the bottom side of the board.
- Change the boot source configuration to boot from the microSD card:
- Set the boot source jumpers: J4: open, J5: closed.
- Set the boot source jumpers: J4: open, J5: closed.
- Power on the board by connecting the 5V power supply.