Factory default settings

Restoring a Digi Connect and ConnectPort TS Family device to its factory default settings clears all current configuration settings, except the IP address settings and administrator password with some exceptions. See the following topics for more information:

• Settings cleared and retained during a factory reset
• File Management

There are several ways to reset the device configuration of a Digi Connect and ConnectPort TS Family product to the factory default settings:

• From the web interface using the Restore Factory Defaults operation

  This method is the best way to reset the configuration, because you can back up the settings using the Backup/Restore operation. The Backup/Restore operation provides a means to restore the configuration after the configuration issues have been resolved. See Reset the factory settings on a Digi Connect and ConnectPort TS Family product from the web interface for more information.

• From the command-line interface, using the boot command

• Using the reset button on the Digi Connect and ConnectPort TS Family device

  Use this method if you cannot access the device from a web browser. The location of the reset button may vary. See Reset the factory settings on a Digi Connect and ConnectPort TS Family product using the Reset button for more information.