Review Connect EZ 2 default settings

You can review the default settings for your Connect EZ 2 device by using the local WebUI or Digi Remote Manager:

Local WebUI

  1. Log into the Connect EZ 2 WebUI as a user with Admin access.
  2. On the menu, click System > Device Configuration.

Digi Remote Manager

  1. If you have not already done so, connect to your Digi Remote Manager account.
  2. Click Device Management to display a list of your devices.
  3. Locate and select your device as described in Use Digi Remote Manager to view and manage your device.
  4. Click Configure.

The following tables list important factory default settings for the Connect EZ 2.

Default interface configuration

Interface type Preconfigured interfaces Devices Default configuration

Wide Area Networks (WANs)

  • Modem
  • WWAN1 cellular modem
  • Firewall zone: External
  • WAN priority: Metric=3
  • SIM failover after 5 attempts
Ethernet Network
  • ETH1
  • Ethernet: ETH1
  • Firewall zone: Edge
  • DHCP client enabled
 
  • ETH2
  • Ethernet: ETH2
  • Firewall zone: Edge
  • DHCP client enabled
 
  • Loopback
  • Ethernet: Loopback
  • Firewall zone: Loopback
  • IP address: 127.0.0.1/8
 
  • Setup IP
  • Ethernet: ETH1
  • Firewall zone: Setup
  • IP address 192.168.210.1/24
 
  • Setup Link-local IP
  • Ethernet: ETH1
  • Firewall zone: Setup
  • IP address 169.254.100.100/16

Other default configuration settings

Feature Configuration
Central management
  • Digi Remote Manager enabled as the central management service.
Security policies
  • Packet filtering allows all outbound traffic.
  • SSH and web administration:
    • Enabled for local administration
    • Firewall zone: Set up
Monitoring
  • Device heath metrics uploaded to Digi Remote Manager at 60 minute interval.
  • SNMP: Disabled