MO (Remote Manager Options)
This command applies to the XBee 3 Cellular LTE-M/NB-IoT.
Configures the connection to Remote Manager.
Note When bit 0 is set to 0, you should manage the Remote Manager keepalive interval, which may otherwise result in excessive data usage. See Configure Remote Manager keepalive interval.
Parameter range
0, 1, 7
| Bit | Description |
|---|---|
| 0 |
Maintains a persistent TCP connection to Remote Manager. If the XBee 3 Cellular LTE-M/NB-IoT cannot establish a connection with Remote Manager, it waits 30 seconds before trying again. On each successive connection failure, the wait time doubles (60 seconds, 120, 240, and so on) up to a maximum of 1 hour. This time resets to 30 seconds once the connection to Remote Manager succeeds or if the device is reset. |
| 1 | TCP connection uses TLS. This is the default. |
| 2-6 | Reserved for future use. |
| 7 | Sets up a constant TLS connection with SM/UDP still enabled. |
Default
6 (Bits 1 and 2 are enabled by default.)
PDF
