AI (Association Indication)
This command applies to the XBee 3 Cellular LTE-M/NB-IoT.
Reads the Association status code to monitor association progress. The following table provides the status codes and their meanings.
Status code | Meaning |
---|---|
0x00 | Connected to the Internet. |
0x22 | Registering to cellular network. |
0x23 | Connecting to the Internet. |
0x24 | The cellular component is missing, corrupt, or otherwise in error. The cellular component requires a new firmware image. |
0x25 | Cellular network registration denied. |
0x2A | Airplane mode. |
0x2B | USB Direct active. |
0x2C |
Cellular component is in PSM. |
0x2D |
Modem shut down. See SD (Shutdown). |
0x2E | Low voltage shut down. |
0x2F | Bypass mode active. |
0x30 | An update is in process. |
0x31 |
Regulatory testing has been enabled. See Regulatory testing commands and %# (Enable/disable test mode). |
0xFF | Initializing. |
Parameter range
0 - 0xFF [read-only]
Default
N/A