XBee Zigbee/Wi-Fi DIP switches on the XBee development board

The XBee development board in the XBee Zigbee Cloud Kit has three DIP switches on the back of the board. These switches set the board for use with XBee Zigbee or XBee Wi-Fi modules. A table on the board shows the proper switch settings for XBee Zigbee and XBee Wi-Fi modules and is shown in the following figure. These switches are set at the factory for the XBee Zigbee Cloud Kit. In the event the switches are changed away from the proper settings for XBee ZigBee modules, you may experience the following symptoms when working with the development board and XBee Zigbee Cloud Kit web application dashboard:

• The buzzer will not work as expected.
• None of the analog components will work or display properly on the dashboard.

The following figure shows the proper DIP switch settings for the XBee Zigbee Cloud Kit for use with XBee Zigbee modules: