SM (Sleep Mode)
This command applies to the XTC RF Module.
Sets or displays the device's sleep mode settings, which configure the device to run in states that require minimal power consumption.
Binary command
0x01
Parameter range
0 - 8 (3 is reserved)
| Parameter | Description |
|---|---|
| 0 | Disabled |
| 1 | Pin Sleep |
| 2 | Serial Port Sleep |
| 3 | [reserved] |
| 4 | Cyclic 1 second sleep (RF module wakes every 1.0 seconds) |
| 5 | Cyclic 2 second sleep |
| 6 | Cyclic 4 second sleep |
| 7 | Cyclic 8 second sleep |
| 8 | Cyclic 16 second sleep |
Default
0
Bytes returned
1
PDF
