Install the device on a tank

Consider the following when installing the Connect Tank device:

• The sensor must be level (perpendicular to the liquid surface) to allow the ultrasonic sound beam to travel straight down.
• Make sure there is a minimum of 7 inches between the Connect Tank sensor and the maximum liquid level.
• Mounting the device vertically ensures proper orientation. If the device is not mounted vertically, it may send incorrect readings.
• Make sure the ultrasonic sound beam’s transmission path does not have any obstructions.
• Position the device as close as possible to the center of the tank’s diameter.

For troubleshooting installation, see Troubleshooting.