Access the XBee Gateway web interface

To access the XBee Gateway web interface, choose one of the following options:

If you know the XBee Gateway device's IP address

  1. Open a web browser, type the IP address in the address bar, and press the Enter key. For example: http://10.101.1.178.

  2. The first time you attempt to access the XBee Gateway, a certificate management prompt appears. Click Proceed Anyway or Advanced > Proceed Anyway.

  3. A login screen appears. Enter the default user name and password:
    • User name: python
    • Password: The unique password printed on the device label. If the password is not on the device label, the default password is dbps. If these defaults do not work, the password may have been updated. Contact your system administrator for help.
  4. The XBee Gateway web interface appears.

If you do not know the XBee Gateway device's IP address

If you already ran the Wireless Access Point wizard, you need the Digi Device Discovery Utility to rediscover the device and open its web interface.

  1. From a web browser, go to the Product Support Download page and click the Diagnostics, Utilities & MIBs link from the Support Downloads section.
  2. Select your product from the list, or a enter keywords to locate it.
  3. Select your operating system from the drop-down list, then select the Device Discovery Utility.
  4. Follow the prompts to complete the installation of the Digi Device Discovery Utility.
  5. To open the Digi Device Discovery on your computer, select Start > Digi > Digi Device Discovery > Digi Device Discovery. The Digi Device Discovery window appears.
  6. Locate your XBee Gateway in the list of devices by matching the Serial Number on the XBee Gateway's label to the corresponding value in the MAC address column in the Digi Device Discovery window.
  7. Double-click the device to open the XBee Gateway web interface, or select the device and click Open web interface under Device tasks in the Digi Device Discovery window.
  8. A login screen appears. Enter the default user name and password:
    • User name: python
    • Password: The unique password printed on the device label. If the password is not on the device label, the default password is dbps. If these defaults do not work, the password may have been updated. Contact your system administrator for help.
  9. To change a subset of configuration settings through Digi Device Discovery, click the Configure Network Settings button. When you change configuration settings, you are prompted for a password. Leave the Password field blank and click OK.

    Note If your firmware version is 3.2.30.x or later, the Digi Device Discovery tool is by default not allowed to change configuration of the XBee Gateway device. ADDP must have the Read-Write mode enabled in order for the button on the XBee Gateway device to control this feature. See Network services settings.