Ethernet IP Settings page

The Ethernet IP Settings page enables you to obtain an IP address using DCHP, specify a static IP address, or enable the auto IP address assignment feature.

Obtain an IP address automatically using DHCP

Choose this option to automatically get an IP address for the device. When the Digi device server is rebooted, it will obtain new network settings.

Contact your network administrator to find out if a DHCP server is available.

Use the following IP address

Choose this option to define a static IP address.

• IP Address: Enter the IP address for the device. An entry is required.

• Subnet Mask: The Subnet Mask is combined with the IP address to determine which network this Digi device server is part of. An entry is required.

• Default Gateway: The IP address of the computer that enables this Digi device server to access other networks, such as the Internet.

Enable AutoIP address assignment

With AutoIP enabled, the Digi device server automatically self-configures an IP address when an address isn't available from other methods, for example, when the Digi device server is configured for DHCP and a DHCP server isn't currently available.