Using the boot command

For details, see Configure from the command line.

From the command line, the boot action=factory command clears all current configuration settings, except the IP address settings, host key settings, and password for the administrative/root user; restores the settings to the factory defaults; then restarts the device.

The password will be reset to the factory default during the reboot. Some models have the default password printed on the device label. If this password is on the label, the password is reset to this default. If a password is not printed on the label, you will need to manually reset the password. See Security settings.

#> boot action=factory

There are several other options for using the boot command to load configuration settings. Type help boot to see all command options.