AnywhereUSB/5 (G2 and M models) components
The AnywhereUSB/5 (G2) and AnywhereUSB/5 M models have the same controls, ports, and connectors, as shown in the following image of an AnywhereUSB/5 M.
|
| Item | Name | Description |
|---|---|---|
| 1 | System Status LED | When the device is powered on and during normal operation, the System Status LED blinks slow green. If the System Status light blinks red for an extended period of time, contact Digi Technical Support. |
| 2 | USB LEDs | Five USB LEDs. A USB LED is solid green when its USB port is connected to a host computer. A USB LED is off when its USB port is not connected to a host computer. |
| 3 | Reset button | When pressed, the Reset button either restarts the device or resets its configuration to factory defaults. |
| 4 | Power connector |
Use the included power adapter. Note The second generation AWUSB/5 (G2 and M) uses an improved center-positive power supply with a locking barrel connector, which is different than first generation AWUSB/5 devices. Power-supplies are NOT interchangeable; use only the power supply provided with the device. |
| 5 | Ethernet connector | The left Ethernet LED is green when connected to a network and the right Ethernet LED blinks orange when there is data transmission activity on the port. Use a standard Ethernet cable. |
| 6 | USB ports | Five USB ports to connect USB devices. |
PDF
