I have two XBee modules configured with API=1. One of them is the Coordinator (CE=1), another one is Router (CE=0).
The Coordinator is plugged on Digi USB development board, and controlled by X-CTU soft.
NO: 5; TO: C0 (digimesh); SM: 0 (Normal)
The end device/router, is driven by a microcontroller.
The transmission from End/Rouder to Coordinator, is OK, and the Coordinator send a "successful transmission status" but, when I tray to send a API "Transmit Request" frame to End/router device:
7E [00 0F]   [00 13 A2 00 40 A5 06 BF] [FF FE]    [3D]
[00 13 A2 00 40 A5 06 BF] : MAC address end/router
 : data byte.)
the end/router device send a message "Route not Found", status delivery=25, etc. and, of course, the packet is discarded on the end/router device.
Any suggestion about this issue?